Filter
Top Products
98
Various Shooting Functions
1
You can prevent camera shake by turning on the camera shake
correction function.
At the time of purchase, the camera shake correction function is
turned on.
1
Switch the mode selector to 5.
2
Press the MENU/OK button.
• The Shooting menu is displayed.
3
Press the " button to select [Camera Shake Cor] and
press the $ button.
4
Press the !" buttons to select
[On].
5
Press the MENU/OK button, or
# button and press the MENU/
OK button.
• The symbol appears on the screen.
Caution------------------------------------------------------------------------------------------
• The camera shake correction function is not available during Multi-shot shooting, long
time exposure and movie shooting. If Multi-shot shooting or long time exposure is set
while the camera shake correction function is turned on, E changes to F. E
disappears when 3 [Movie] is selected from the scene mode.
• The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
• Effects of the camera shake correction function vary depending on the surroundings.
Note ----------------------------------------------------------------------------------------------
The J mark appears when camera shake is likely to occur. (GP.30)
Using the Camera Shake Correction
Function to Prevent Camera Shake
(Camera Shake Cor)