Filter
Top Products
EXTRA OPTIONS
27SAFEGUARD / TOTALGUARD
8.3 Changing the access code (PIN)
The access code is your personal secret code. After changing this code, you are the only one who has access to the settings on
the console. You also use this code to disarm the alarm via the number pad. Make sure you memorise the code, because only a
Marmitek Authorised Service Center can help you reset the code to the factory setting (0000). The Service Center will charge you
for resetting the console.
1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.
2. Enter your 4-digit PIN code (factory setting 0000). For every digit entered, a * will appear on the display.
3. When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.
4. Use the menu buttons / to go to menu item 5. NEW PIN. Press OK to select this menu item. You can also go to this menu
item directly by pressing a 5 on the number pad.
5. Enter your new PIN code (4 digits). The new PIN can be seen on the display. Check if you entered the correct PIN code and
press OK.
6. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the
menu. If you choose No, you go back to the main menu.
9. Advanced security functions
9.1 Disarming the siren for silent alarm
You can set the security system to raise the alarm without sounding the siren (just the telephone dialler and lighting). In case of a
burglary, the built-in siren will not be activated (N.B., other sirens installed will still work). The siren is turned on in the factory
settings.
1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.
2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear
on the display.
3. When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.
4. Use the menu buttons / to go to menu item 7. OPTIONS. Press OK to select this menu item. You can also go to this menu
item directly by pressing a 7 on the number pad.
5. Use the menu buttons / to go to menu item SIREN. Press OK to select this menu item.
6. Choose 1 for SIREN ON or 2 for SIREN OFF.
7. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the
menu. If you choose No, you go back to the main menu.
9.2 Activating the chime
The console can, when switched off, sound a chime – ding-dong – when a door armed with a door/window sensor is opened.
This ensures that you will always hear if someone is entering your house or small children open a door. This function is activated
in the factory settings.
1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.
2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear
on the display.
3. When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.
4. Use the menu buttons / to go to menu item 7. OPTIONS. Press OK to select this menu item. You can also go to this menu
item directly by pressing a 7 on the number pad.
5. Use the menu buttons / to go to menu item CHIME. Press OK to select this menu item.
20071_20070228_UG_SC9000_EN 08-03-2007 10:07 Pagina 27