Filter
Top Products
122
10
Appendices
Problem Cause Solution
Refer to
The level indicator is
not displayed.
[Level Setting] is set to [Off] or
[Sound].
Set [Level Setting] to [Display] or
[Display+Sound].
P.42
The display is set to a setting other
than normal symbol display or
histogram.
Press the DISP. button to change
the display to normal symbol
display or histogram.
P.40
The camera is upside down (The
shutter release button is on the
bottom).
Hold the camera correctly. —
The image is tilted even
though it was shot with
the level indicator in
the middle or while
the level sound was
sounding.
You shot the image while moving,
such as on a amusement ride.
Shoot in an environment that is
not moving.
—
The subject is not level. Check the subject. —
Self timer lamp does
not light.
[Discreet Mode] or [Pets] is
selected in scene mode.
Choose another mode. P.52,
P.53
Playback/Deleting
Problem Cause Solution
Refer to
Cannot play back, or the
playback screen does
not appear.
The camera is not in playback
mode.
Press the 6 (Playback) button.
P.25
The VIDEO/AV cable is not
connected properly.
Connect properly. P.97
The [Video Out Mode] setting is
incorrect.
Set it to the correct format. P.102
The contents of the SD
memory card cannot
be played back, or the
playback screen does
not appear.
No SD memory card is loaded, or
an SD memory card with no stored
images is loaded.
Load a card with stored images. —
You played back an SD memory
card that was not formatted with
this device.
Load a card that was formatted
and recorded with this device.
P.24,
P.99
You played back an SD memory
card that was not recorded
normally.
Load a normally recorded card. —
The contact surface of the SD
memory card is dirty.
Wipe with a soft, dry cloth. —
There is something wrong with
the SD memory card.
Play back images from another
card and if there is nothing
wrong with the card, the camera
is okay. There may be something
wrong with the card, so do
not use it.
—
The picture display
turned off.
Battery is exhausted. Charge the rechargeable battery. P.23
The camera was left unattended
and unused, so auto power off
turned it off.
Turn the camera back on. P.25