Filter
Top Products
55
3
Shooting Mode Types
4
Press the ADJ./OK or Fn button.
• Pressing ADJ./OK button returns the camera to shooting mode with
the selected option shown at the top of the picture display. Pressing
Fn button selects the highlighted option and displays the shooting
menu (GP.71).
5
Press the shutter release button to shoot the picture.
Changing the shooting menu or setup menu setting in scene mode ----
After pressing the MENU button in shooting mode to display the menus, press
the ADJ./OK button N to select the [MODE] tab. You can then press " once to
display the shooting menu or twice to display the setup menu.
Using Skew Correction Mode
1
Select [Skew Correct Mode] in the scene mode menu and
press the ADJ./OK button.
2
Press the shutter release button to shoot the picture.
• The display indicates that the image is being processed, and then
the area recognized as the correction range is displayed with an
orange frame. Up to five areas can be recognized.
• If the target area cannot be detected, an error message appears. The
original image remains unchanged.
• To select another correction area, move the orange frame to the
target area by pressing the ADJ./OK button F.
• To cancel skew correction, press the ADJ./OK button !. Even if you
cancel skew correction, the original image remains unchanged.
3
Press the ADJ./OK button.
• The display indicates that the image is being corrected, and then the
corrected image is recorded. The original image remains unchanged.
Note -------------------------------------------------------------------------------------
You can also correct the skew of a previously shot still image (GP.94).