Filter
Top Products
24
If you are using the camera for the first time, read this section.
Loading the Rechargeable Battery and SD Memory Card
After recharging the rechargeable battery, load the battery and the SD
memory card. Be sure the camera is off before removing the battery or
the SD memory card.
1
Open the battery/card cover.
2
Insert the rechargeable battery and SD memory card.
• Make sure the SD memory card is facing the right way and then push
the card all the way in until it clicks.
• When the rechargeable battery is loaded in place, it is locked with
the hook shown in the figure.
Logo side
• If the battery is not inserted in the correct orientation, the camera
will not turn on. Reinsert the battery in the correct orientation.
3
Close the battery/card cover and
slide it back into place.
Removing the Rechargeable Battery
Open the battery/card cover. Release the hook that locks the
rechargeable battery. The battery is ejected. Pull the battery out of the
camera. Be careful not to drop the battery when removing it from the
camera.
Removing the SD Memory Card
Open the battery/card cover. Push in the SD memory card and gently
release to eject it. Pull the card out of the camera.