Filter
Top Products
76
PC MODE
Downloading stored images
Once you have downloaded images to your PC, they can be edited and printed.
1. Connect the camera to your PC with the USB cable.
2. On your computer’s desktop display, select [My computer] and double click [Removable Disk
Dcim 100sscam]. The image files will then be displayed.
- If the card is inserted, images that are stored on the card will be displayed.
- If the card is not inserted, images that are stored on the internal memory will be displayed.
- Use the COPY or MOVE function to download the images to your PC.
- By using [Digimax Viewer], you can see the stored images in the memory directly on the PC
monitor and you can copy or move the image files.
- Refer to the software part of this manual (p.99) regarding image viewer software installation and
usage.
- If you wish to edit downloaded images, you can use [MGI PhotoSuite III SE].
- Refer to the software part of this manual (p.106) regarding editing software installation and usage.
INFORMATION
The USB Storage Driver must be installed before using the PC mode in Windows 98/ 98SE.
Refer to page 87 regarding installation.
To save battery power, it is recommended that you use an AC adaptor(Optional) when
connecting the camera to a computer.