Filter
Top Products
81
Setting up the application software
If you have installed the camera driver,
[Found New Hardware Wizard] may not
open.
After the [Found New Hardware Wizard]
window opens, a window asking you to
select a driver file may appear. In this case,
specify the C:\WINDOWS\INF folder (for
Windows 98 and 98 SE). If you can't find the
[INF] folder, check the [Show all files] button
in [Window's Explorer View Folder
option View].
When connecting the camera to your PC,
it is recommended that you use an AC power adapter.
Before connecting the camera to the PC, you should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found
New Hardware Wizard] will open. In this case, cancel the [Found New Hardware
Wizard] and disconnect the camera. Install the camera driver and connect the camera
to the PC again.(p.76)
Should the computer not find the camera driver after installation, please try one or
more of the following measures.
1. Delete the camera driver (p.85), and re-install the driver.
2. Refer to FAQ (p.100~101) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
INFORMATION