Filter
Top Products
English_47
Example of Time Lapse REC
Time Lapse REC records image frames at a predefi ned
interval to produce a time-lapse video.
Time Lapse REC is useful for fi lming in the following
situations:
Blooming fl owers
Clouds rolling by in the sky
•
•
This function is shut off after being used one time.
60 captured images compose a video of 1 second length. Since the minimum length of a video to be saved by your camcorder is
one second, the interval defi nes how long the Time Lapse Recording should be set for. For example, if you set the interval to "30
Sec," Time Lapse Recording should be set for at least 30 minutes to record a minimum video length of 1 second (60 images).
Once the Time Lapse REC fi nishes recording for its total recording time, it switches to standby mode.
Press the Recording start/stop ( ) button if you want to stop the Time Lapse REC.
Audio is not recorded during Time Lapse Recording.
When a video recording fi lls up 3.5GB of storage media, a new recording fi le is automatically started at that point.
When the battery is discharged during Time Lapse REC, it saves the recording up to that point and switches to standby mode. After
a while, it displays a warning message, then turns off automatically.
When memory runs out while performing Time Lapse REC, the camcorder switches to standby mode after saving what was recorded
so far.
We recommend using the AC power adaptor when using the Time Lapse REC function.
When a time lapse recording starts, the "Time Lapse Recording" message blinks on the screen and it appears that the screen has
stopped. This is a normal operation; do not remove the power source or memory card from the camcorder.
This camcorder is an NTSC-system-based camcorder for video encoding. But actual output depends upon user setting.
➥
page 43
•
•
•
•
•
•
•
•
•
•
•
Total time for recording
Recording interval
Timeline
Time for recording on the
storage media (a video
clip of Time Lapse REC)