Filter
Top Products
English_85
Connecting to a computer
Symptom Explanation/Solution
When using the videos, a
computer does not recognise
your camcorder.
Disconnect the USB cable from the computer and camcorder, restart the computer, then
reconnect it correctly.
•
Cannot play a video file
properly on a PC.
A video codec is needed to play the file recorded on your camcorder. Install or run the built-in
edit software (Intelli-studio).
Make sure you insert the connector in the correct direction, and connect the USB cable to the
USB jack on your camcorder firmly.
Disconnect the cable from the computer and camcorder, restart the computer. Reconnect it
properly.
Your computer may not have the necessary performance specifications to playback a video file.
Check the recommended computer specifications.
•
•
•
•
Intelli-studio does not function
properly.
Exit the Intelli-studio application, and restart the Windows computer.
Intelli-studio is not Macintosh compliant.
Set "PC Software" to "On" in the Settings menu.
According to your computer type, the Intelli-studio programme may not run automatically. In this case,
open the desired CD-ROM drive that has the Intelli-studio programme in My Computer and run iStudio.exe.
•
•
•
•
The image or sound on your
camcorder is not played on
your computer properly.
video playback or sound may stop temporarily depending on your computer.
The video or sound copied to your computer is not affected.
If your camcorder is connected to a computer that does not support Hi-speed USB (USB2.0),
the images or sound may not be played back correctly.
The images and sound copied to your computer are not affected.
•
•
The playback screen is
paused or distorted.
Check the system requirements to play a video.
➥
page 63
Exit all other applications running on the current computer.
If a recorded video is played on your camcorder when it is connected to a computer, the image
may not play smoothly, depending on the transfer speed. Please copy the file to your PC, and
then play it back.
•
•
•