Samsung HMX-U10UN Camcorder User Manual


 
English_83
Symptom Explanation/Solution
The recording stops automatically.
There is no more free space for recording on the storage media.
Back up important files on your PC and format the storage media or delete the
unnecessary files.
If you use a memory card with a low writing speed, the camcorder
automatically stops recording the videos and the corresponding message
appears on the LCD screen.
When recording a subject illuminated by bright
light, vertical lines appear.
The camcorder is unable to record these levels of brightness.
When the screen is exposed to direct sunlight
during recording, the screen turns red or black
for an instant.
Do not leave the camcorder with the LCD screen exposed to direct sunlight.
During recording, the date/time does not display.
"Date/Time Set" is set to off. Set the "Date/Time Set" to on.
page 25
The beep sound is not heard.
Set the "Beep Sound" to "On."
page 58
The beep sound is temporally off while recording videos.
When the component/AV cable jack is connected to the camcorder, the beep
sound will automatically turn off.
There is a time difference between the point
where you press Recording start/stop (
)
button and the point where the recorded video
starts/stops.
On your camcorder, there may be a slight time delay between the point when
you press Recording start/stop (
) button and the actual point where
the recorded video starts/stops. This is not an error.
The recording stops.
The internal temperature of your camcorder is unusually high. Turn off your
camcorder and leave it for a while in a cool place.
Your camcorder is damp and moist inside (condensation). Turn off your
camcorder and leave it for about 1 hour in a cool place.
You cannot record a photo
Set your camcorder to Record mode.
page 19
Release the lock on the write-protection tab of the memory card if set.
The storage media is full. Use a new memory card or format the storage
media.
page 57 Or remove unnecessary images.
page 49
The digital zoom function is not available.
When the video resolution is set to 1080/30p or Slow Motion, the digital zoom
function is not available.
Choose another video resolution.