Filter
Top Products
16
Q How to use the PROGRAM mode(
)
Selecting the program mode will configure
the camera with optimal settings. You can still
manually configure all functions except the
aperture value and shutter speed.
1. Select the Program mode by rotating the
mode dial.
2. Press the menu button to configure
advanced functions such as image size
(p.29), quality (p.29), metering (p.30),
continuous shooting (p.30) and special
effects (p.36).
Starting the recording mode
Q How to use the AUTO mode (
)
Please select this mode for quick and easy picture taking with minimal user
interaction.
1. Insert the battery (p.12) taking note of the
correct polarity (+ / -).
2. Insert the memory card (p.12). As this
camera has a 450MB internal memory,
it is not essential to insert the memory
card. If the memory card is not inserted,
an image will be stored in the internal
memory. If the memory card is inserted,
an image will be stored on the memory
card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera. (If the date / time that is
displayed on the LCD monitor is incorrect, reset the date / time before
taking a picture.)
5. Select the Auto mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by using
the LCD monitor.
7. Press the shutter button to capture an image.
O If the auto focus frame turns to red when you press the shutter button
down half way, it means that the camera cannot focus on the subject.
Should this be the case, the camera is unable to capture an image
clearly.
INFORMATION