Filter
Top Products
73
Setup 2
[Selecting Video out type]
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
Using AV cable with camera
Connect the camera to an external monitor
with the AV cable. Monitor is turned off when
the connection is established and images
and movie plays on an external monitor.
When connected to an external monitor, some
functions are not available.
Yellow - Video
White - Sound
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
There will be a digital noise on the external monitor, but it is not a
malfunction.
If the image is not in the centre of the screen, use the TV controls to
centre it.
When the camera is connected to an external monitor, some parts of
the image may not display.
After connected to an external monitor, it may take time for the
operation on the touch screen to be recognized. Operate the hand sign
on the external monitor correctly using a touch pen.
Functions available when connected to an external monitor are the
following.
Selection of playback file type (still image, movie clip, and voice)
Playback of still image/movie clip/voice recording
Slide show (played with the value set before connected to an external
monitor)
Selection of still image/movie clip/voice file in thumbnail display mode
Image enlargement
Deletion of still image/movie clip/voice file
INFORMATION