Filter
Top Products
《66》
Starting PC mode
■ Connecting the camera to a PC
■ Disconnecting the camera and PC : Refer to page 68
(Removing the removable disk).
※ If you selected [Printer] in Step 4, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 2 and onward.
● To save battery power, it is recommended that you use the cradle (optional)
when connecting the camera to a computer.
INFORMATION
•If you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
•In this mode, you can download stored images to your PC through the USB
cable.
•The LCD monitor is always turned off in PC mode.
■ Connecting the camera to a PC
1. In any mode with the exception of Voice
Recording mode, press the Menu button.
2. Press the LEFT / RIGHT button and select the
[SETUP] menu tab.
3. Select the [USB] menu by pressing the UP /
DOWN button and press the RIGHT button.
4. Use the UP and DOWN buttons to select
[Computer], and then press the OK button.
5. Press the menu button twice and the menu will
disappear.
6. Connect the PC to the camera with the USB
cable.
SETUP
AF Lamp
Sound
USB
LCD
Video Out
Back: Set:OK
Computer
Printer