Filter
Top Products
Face recognition (FR) button Using the LCD monitor to set the camera
ŝ30Ş
ƃƃƃƃƃ - ƃ
ƃƃ-
ƃƃ ƃ - ƃ
ƃƃƃƃƃ -
ƃƃ ƃ -
ƃƃ ƃ -
ƃƃ ƃ -
ƃƃ-
ƃƃ --
SIZE ƃƃƃƃƃƃƃp.36
ƃƃƃƃƃƃ
ƃƃ -
ƃƃ
ƃƃ
ƃ
NORMAL
AUTO MACRO
MACRO
OFF
AUTO
RED EYE
FILL IN
SLOW SYNC
RED EYE FIX
SINGLE
CONTINUOUS
HIGH SPEED
MOTION CAPTURE
AEB
MENU Page
FOCUS
p.33~34
p.34~35
p.36
You can use the menu on the LCD monitor to set up recording functions.
(ƃ : Selectable, - : Partly selectable)
ƃ This function can detect up to 9 persons.
ƃ When the camera recognises many people at the same time, it will
focus on the nearest person.
ƃ When the camera detects a target face, the white colour focus frame
will be displayed over the target face and the gray colour focus frame
will be displayed over the remaining faces(up to 8). Press the shutter
button halfway down to focus the face and the white focus frame turns
green.(Total 9)
ƃ Return to previous AF mode if face detection was failure.
ƃ In some conditions this function cannot work properly.
- When a person wears dark glasses or some part of the face is hidden.
- When the person being taken does not look at the camera.
- When the camera doesn't detect a face because of too much or too
little light.
- There is too great a distance between the camera and the subject.
ƃ The maximum available Face Recognition range is 2.5m (Wide).
ƃ The nearer the subject, the faster the camera can recognize the
subject.
ƃ The digital zoom cannot be used in the Face Recognition mode.
FLASH
SHOOTING