Filter
Top Products
ŝ76Ş
[No] : Cancels "Copy to Card".
[Yes] : All images, movie clips and voice recording
files saved in the internal memory are copied
to the memory card after the [Processing!]
message is displayed.
ƈ Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the
stored still images or movie clips by connecting the
camera to an external monitor via the AV cable.
When the camera is connected to an external
monitor, the LCD monitor will be turned off
automatically.
Yellow - Video
White - sound
Copy To Card
This enables you to copy image files, movie clips and voice recording files to
the memory card.
Selecting Video out type
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
ƃ When this menu is selected without inserting a memory card, you can
select the [Copy To Card] menu but the menu can’t be run.
ƃ If there is not enough space available in the memory card to copy
saved images in the internal memory (20MB), the [Copy To Card]
command will copy only some of the images and display [Memory Full!]
message. Then the system will return to the playback mode. Please be
sure to delete any unnecessary files in the internal memory to free up
space before inserting the memory card into the camera.
ƃ When you move the images that are stored in the internal memory to
the memory card, the next number of file names will be created in the
card to avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file
names start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file
names start from after the last captured file name. After completing
[Copy To Card], the last stored image of the last copied folder is
displayed on the LCD monitor.
Setup menu 4 ( )
No
Yes
Format
Delete All
Copy to Card
Video Out
Reset
Ȝ
Exit:BACK
NTSC
PAL
Format
Delete All
Copy to Card
Video Out
Reset
Ȝ
Exit:BACK