Filter
Top Products
<<
27
>>
Using the camera buttons to set the camera
POWER button
Used for turning the camera’s power on / off.
If there is no operation during the specified
time, the camera’s power will be turned off
automatically to save battery life.
Refer to page 72 for more information about
the auto power off function.
OIS (Optical Image Stabilization) button
Minimize camera-shake during shooting by pressing the OIS button in
Shooting Mode.
When the Shutter button is pressed halfway down, the shutter speed and
aperture will appear in the AMOLED and camera-shake correction will be
activated.
The recording mode function can be set up by using the camera buttons.
SHUTTER button
Used for taking an image or recording voice in the RECORDING mode.
● In MOVIE CLIP mode :
Pressing the shutter button down fully starts
the process for recording a movie clip.
Press the shutter button once and the movie
clip is recorded for as long as the available
recording time in the memory allows. If you
wish to stop recording, press the shutter button
again.
● In STILL IMAGE mode :
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and
stores the image. If you select voice memo recording, the recording will start
after the camera has finished storing the image data.
OIS may not function properly in the following circumstances:
- To take pictures of a moving subject
- To take pictures with higher digital zoom values
- When camera shake is beyond the camera-shake correction range
- The slower the shutter speed, the lower the camera-shake correction
performance.
[Before using OIS] [After using OIS]