Filter
Top Products
[Using the AV cable with Cradle]
[Using the AV cable with Camera]
V
A
R
I
O
P
L
A
N
Z
O
O
M
6
.
3
-
4
4
.
1
m
m
7.2 MEG
A P
IXELS
7
.2 MEG
A PI
XELS
V
A
R
I
O
P
L
A
N
Z
O
O
M
6
.
3
-
4
4
.
1
m
m
7
.2 M
E
G
A
P
IX
E
L
S
Yellow - Video
White - sound
Ś60ś
Setup menu
[ Copy To Card ]
ƅ This enables you to copy image files, movie clips and voice recording files to
the memory card.
[No] : Cancels "Copy to Card".
[Yes] : All images, movie clips and voice recording
files saved in the internal memory are
copied to the memory card after the
[Processing!] message is displayed.
ƀ When this menu is selected without inserting a memory card, you can
select the [Copy To Card] menu but the menu can’t be run.
ƀ If there is not enough space available in the memory card to copy saved
images in the internal memory (19MB), the [Copy To Card] command will
copy only some of the images and display [Memory Full!] message. Then
the system will return to the playback mode. Please be sure to delete any
unnecessary files in the internal memory to free up space before inserting
the memory card into the camera.
ƀ When you move the images that are stored in the internal memory to the
memory card, the next number of file names will be created in the card to
avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file names
start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file names
start from after the last captured file name. After completing [Copy To
Card], the last stored image of the last copied folder is displayed on the
LCD monitor.
INFORMATION
No
Yes
Format
Copy to Card
Video Out
USB
Reset
Ȗ
Exit:BACK
[ Selecting Video out type ]
ƅ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
ƅ Connecting to an external monitor
ƀ Using the USB cable with Cradle (Optional) :
Connect the camera and the cradle. Connect the
cradle to an external monitor with the supplied
AV cable.
ƀ Using the AV cable with the Camera :
Connect the camera to an external monitor with
the supplied AV cable.
NTSC
PAL
Format
Copy to Card
Video Out
USB
Reset
Ȗ
Exit:BACK