Filter
Top Products
26 27
26 27
ENG
Note
In case of B/W mode, it may fail to focus when B/W mode is
converted to Color mode.
That is because it must have the condition to have IRIS opened for
the maximum before adjusting the Back-Focus.
The smaller the F number of lens is, the lower the focus depth of
field is (e.g. Using a high speed electronic shutter may lower the
depth of the camera).
It is required to set the focus under the condition that IRIS is open
for the maximum in color mode.
DAY...
If you press the Setup switch when the DAY… submenu is selected,
the corresponding screen appears. You can set the values for
C-GAIN, AGC COLOUR, AGC DETAIL, and C-KNEE in Day mode.
Colour images are implemented by these settings.
Note
When the value of AGC DETAIL becomes large, it also makes the
noise stand out.
(DAY)
C-GAIN (7) � � � � � � I
AGC COLOR ( 0)
� � � � I � � � �
AGC DETAIL (0) I � � � � � � �
C-KNEE (5)
� � � � � I � �
RET
SCC-B2313_Eng_TUR.indd 27 2007-06-07 ｿﾀﾈﾄ 1:17:15