Filter
Top Products
28 29
28 29
NIGHT...
If you press the Setup switch when the NIGHT… submenu is se-
lected, the corresponding screen appears.
Even in night mode, you can see colour images in bright illumination.
Therefore you can select any of COLOUR… and BW… In case of
COLOUR…, you have to set the colour temperature for white balance.
You can also specify the settings for red and blue colours on your own.
In case of BW..., when the BURST is set to ON, the burst signals are
output with the BW Composite Video signals. And no burst signals are
output when the BURST is set to OFF.
AUTO...
This automatically converts the DAY mode to NIGHT mode and vice
versa depending on illumination. In low illumination, it removes the IR
filtering function to raise the sensitivity. Otherwise, it activates the IR
filtering function to lower the sensitivity.
If you press the Setup switch when the AUTO… submenu is
selected, the corresponding screen appears.
(NIGHT)
COLOR/BW COLOR...
RET
(AUTO)
LEVEL ( 0) I � � � � � � � �
DAY NIGHT 2 S
NIGHT
DAY 5 S
RET
SCC-B2313_Eng_TUR.indd 28 2007-06-07 ｿﾀﾈﾄ 1:17:16