Filter
Top Products
8 9
8 9
Part Names and Functions
❚
Side View
1 Auto Iris Lens Connector
This groove is used for screwing the mount adapter, a part of the
bracket where the camera will be installed.
2 Mount Adapter Fixing Grooves
These grooves are used when fixing screws of the mount
adapter connected to the bracket when installing the camera on it.
3 Back Focus Control Bar
You can adjust the back focus by moving it up and down.
4 Automatic Shutter Lens Control Cable
This cable transmits the power and signals from the camera for
controlling the lens shutter.
4
Automatic Shutter
Lens Control Cable
5
ALC Lens
Selection Switch
1 Auto Iris Lens
Connector
2 Mount Adapter
Fixing Grooves
3 Back Focus
Control Bar
Camera Lens
SCC-B2313_Eng_TUR.indd 8 2007-06-07 ｿﾀﾈﾄ 1:17:05