Filter
Top Products
28 29
28 29
ENG
For this function, you can specify the level for each conversion
between Day and Night.
Note
When the DAY/NIGHT is set to AUTO, the AGC is displayed with
--- so you cannot change its setting.
EXT
This automatically converts the colour mode to BW mode and vice
versa by interfacing with an external sensor.
❚
WHITE BAL
The WHITE BAL menu is used to configure the white balance
related settings for this camera.
To adjust the white balance, 4 different modes are provided as follows:
ATW1
(Auto Tracing White Balance mode 1): The camera can
automatically adjust the colour temperature in real time according
to the ambient temperature change. The colour temperature
variation range is approximately from 2500°K to 9300°K.
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC HIGH
MOTION DET OFF
DAY/NIGHT EXT
WHITE BAL ATW2
PRIVACY OFF
SPECIAL ...
RS-485 ...
EXIT QUIT
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC HIGH
MOTION DET OFF
DAY/NIGHT DAY...
WHITE BAL ATW1
PRIVACY OFF
SPECIAL ...
RS-485 ...
EXIT QUIT
SCC-B2313_Eng_TUR.indd 29 2007-06-07 ｿﾀﾈﾄ 1:17:16