Filter
Top Products
26_ camera operation
camera operation
FONT COLOR :
You can change the OSD font color. (White, Yellow, Green, Red, Blue)
LANGUAGE : You can select the menu language according to your requirements.
RETURN : Return to the SPECIAL menu.
COAX : You can select whether to
use COAX communication.
RETURN : Return to the SPECIAL
menu.
❶
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘IMAGE ADJ’.
❷
Select a desired mode using the
Function Setup switch.
GAMMA :
The setting range is 0.2 ~ 1.0. The
closer to 1.0 the setting is, the
darker it gets.
PED LEVEL :
The setting range is 1
~ 100. The closer to 100 the setting is, the higher the PED level gets.
COLOR GAIN :
The setting range is 1 ~ 100. The smaller the setting value is the
smaller the color gain gets and the more color blind it gets.
H-REV : Flip an image horizontally.
V-REV : Flip an image vertically.
D-ZOOM : You can use a digital zoom of x1 ~ x16.
SHARPNESS :
Select a mode to adjust the thickness of an image’s sharpness.
Increase or decrease the level of each mode to adjust the level of
sharpness. Depending on the image, adjust it to an appropriate value.
(OFF/LOW/MIDDLE/HIGH)
PFR : Purple fringe can be reduced.
RETURN : Return to the SPECIAL menu.
When the V-REV or H-REV mode is enabled, the text on the screen does not fl ip.
If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.
When you use the PFR function, if there is an object near the strong light, the color can be missing.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
M
COMM SETUP
▶
1.
COAX
ON
2.
RETURN
IMAGE SETUP
▶
1.
GAMMA
0.45
2.
PED LEVEL
----
----
50
3.
COLOR GAIN
----
----
50
4. H-REV OFF
5. V-REV OFF
6. D-ZOOM OFF
7. SHARPNESS MIDDLE
8. PFR
OFF
9.
RETURN