Samsung SCD-5083R Security Camera User Manual


 
34_ troubleshooting
troubleshooting

If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
Problems Troubleshooting
Nothingappearsonthescreen.
Check that the power cord and line connection between the
camera and monitor are properly connected.
Check that you have properly connected BNC cable to the
camera.
Check the type of lens.
Theimageonthescreenisdim.
Is lens stained with dirt? Clean your lens with soft, clean cloth.
Set the monitor or DVR to the proper condition.
If the camera is exposed to very strong light, change the
camera position.
Theimageonthescreenisdark.
Adjust the contrast feature of the monitor or DVR.
If you have an intermediate device, set the 75Ω / Hi-z
properly.
The camera is not working
properly, and the surface of the
camera is hot.
Check that you have properly connected the camera to an
appropriate power source.
he DAY/NIGHT menu does not work.
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
The INTELLIGENCE function does
not work.
Check that INTELLIGENCE of menu is ‘OFF’.
Color is not correct.
Check the setting of WHITE BAL SETUP menu
The screen flickers continually.
Ensure the camera is not pointing towards the sun.
When coaxial communication is not
available
Make sure that the camera and monitor are installed within
the recommended distance.
Use the video amplier equivalent to coaxitron if the
recommended installation distance is exceeded.