Filter
Top Products
English_33
● CAMERA OPERATION
If the camera shoots an object a short distance away, the video analysis function can be degraded.
In the following cases, motion detection or video analysis event performance can be degraded
or malfunctions can occur.
- If an object’s brightness or color is similar to that of the background
- If there is little movement near the screen edge
- If multiple movements keeps occurring randomly, such as scene switching or sudden light
changes
- If an object fixed in the same location keeps moving
- Moving away from the camera or approaching the camera. Little location change on the
screen.
- If a moving object approaches the camera
- If random objects obstruct the view of each other
- If more than one objects merge or one object divides into multiple objects
- If an object moves too fast (the same object should have overlapping areas between the
consecutive frames)
- If there are reflections/blurs/shadows created by a strong light such as direct sunlight,
lights, and headlights.
- Severe snow, rain and wind. Sunset or sunrise
- If the size is greater than the max size or smaller than the min size, motion is not detected.
To avoid false detection caused by noises, set the max/min detection size suitable for the
installation environment.
But the same movement in the same location can cause a different detection size. So,
include margins when you set the min/max detection size.
Select a desired EXIT mode using the Function Setup switch depending on the
camera purpose.
Save the current settings and exit the MAIN SETUP menu.
Do not save the current settings and exit the MAIN SETUP menu.
Revert camera to factory settings. (The language, communication and
lens settings will remain the same).