Filter
Top Products
Basic Recording
Playing back a tape on the LCD
ENGLISH
32
✤ You can monitor the playback picture on the LCD monitor.
✤ Make sure that the battery pack is in place.
1. Hold down the tab of the power switch and push the switch to
PLAYER mode.
2. Insert the tape you have just recorded.
3. Open the LCD monitor and make sure that STOP is displayed
on the OSD.
Adjust the angle of the LCD monitor and set the brightness or
the color if necessary.
4. Press the (REW) button to rewind the tape
to the beginning.
■ To stop REWIND, press the (STOP) button.
■ Camcorder stops automatically after rewinding.
5. Press the (PLAY/STILL) button to start playback.
■ You can see the video you recorded on the LCD.
■ To stop the PLAY operation, press the (STOP) button.
Note:
You can also monitor the picture on a TV screen, after
connecting the camcorder to a TV or VCR. (see page 56)
1
PLAYER
2
PUSH
3
STOP
4
REW STOP
5
PLAY/
STILL
STOP