Filter
Top Products
ENGLISH
47
Advanced Recording
7. Press ENTER.
■ The month to be reset will blink.
8. Turn the UP/DOWN dial to set the desired month.
9. Press ENTER.
■ The day to be reset will blink.
10. You can set the day, hour and minute following
the same procedure used for setting the year and month.
11. Press ENTER after setting the minute and the clock setting screen will disappear.
The selected date and time will then be displayed.
Recording the DATE/TIME
1. Make sure that you have set the DATE/TIME.
2. Set the power switch to CAMERA mode. (see page 22)
■ Open the LCD monitor and adjust it to see comfortably.
3. Press the DATE/TIME button the required number of times.
■ To record the date only, press the DATE/TIME button once.
■ To record the date and time, press the DATE/TIME button
twice.
4. Press the START/STOP button to record the DATE/TIME on your recording.
Notes:
■ If your date and time settings are not maintained in the camcorder,
it means the installed LITHIUM BATTERY is discharged. (see page 21)
■ You cannot conceal the recorded date or time during playback.
■ The DATE/TIME function cannot be turned off in EASY or CUSTOM modes.
●
CLOCK SET
●
0:00
AUG. 29, 2005
●
CLOCK SET
●
0:00
AUG. 29, 2005
●
CLOCK SET
●
0:00
AUG. 29, 2005