Filter
Top Products
ENGLISH
46
Advanced Recording
Setting and Recording the DATE/TIME
✤ Setting and recording the date/time feature works in the CAMERA mode only.
✤ You can record the date/time on your tapes, so you will know when it was made. The date and time
are recorded whenever they are displayed on the viewfinder or LCD.
Setting a DATE/TIME
✤ Setting the DATE/TIME is possible in STANDBY of CAMERA mode only.
1. Make sure that you have installed the LITHIUM BATTERY. (see page 21)
The LITHIUM BATTERY is needed to maintain the clock.
2.
Set the power switch to CAMERA mode. (see page 22)
3. Press the MENU ON/OFF button,
then the MENU list will appear.
4. Turn the UP/DOWN dial until CLOCK...........SET
is highlighted.
5. Press ENTER.
■ CLOCK SETTING is possible when the DATE and TIME
appear.
■ BLINKING indicates the possible changes for the setting.
The year will be the first to blink.
6. Turn the UP/DOWN dial to set the desired year.
●
CLOCK SET
●
0:00
AUG. 29, 2002
●
CLOCK SET
●
0:00
AUG. 29, 2005
LCD ADJUST
CUSTOM SET
CLOCK SET
TITLE SET
TITLE....................OFF
DIS........................OFF
EXIT: MENU
LCD ADJUST
CUSTOM SET
CLOCK SET
TITLE SET
TITLE....................OFF
DIS........................OFF
EXIT: MENU