Filter
Top Products
SPEED DOME CAMERA User Guide
38
Installing Your Camera
3. Connect the safety wire (attached to the camera) to the surface mount as shown.
Then, arrange the cables. (For more information about the wiring, refer to "Camera
Wiring Interface Board(18 Page)".)
4. Arrange the cables inside the surface mount so that they should not be entangled
or stuck in, and align the guide rib of the camera with that of the surface mount.
Use the L-shaped wrench to tighten the screws (x4) so that the camera is secured
to the mount. To ensure waterproofness, take caution lest that the outer gasket
should get loose or be stuck in.
SAFETY-WIRE
SURFACE MOUNT
SCREW
MAIN-FRAME
GASKET
Guide-Rib of MAIN-
FRAME
Guide Rib of SURFACE
MOUNT