Filter
Top Products
4. Specify the zone area.
You can point to the top, bottom, left, and right base lines by
setting a proper value from 0 to 15 with an increment of 1.
Move the arrow indicator to 'Top' using the UP or DOWN
button and increase or decrease the value using the LEFT or
RIGHT button. Repeat the procedure for bottom, left, and
right.
Top base line
Right base line
Bottom base line
Left base line
5. Adjust Sensitivity.
Move the arrow indicator to 'Sensitivity' using the UP or
DOWN button, then press the LEFT or RIGHT button to
decrease or increase the value.
If you decrease the sensitivity, the camera will detect only
motion that is clearly noticeable. If you want to set the
camera to detect minor motion, increase the sensitivity.
You can select the sensitivity from 0 to 10.
Higher sensitivity detects smaller motions at the risk of false
detection.
Therefore zone adjustment is recommended rather than
sensitivity adjustment.
How to Assign the Zone
If you assign a zone, an alert signal occurs when the camera detects
motion of objects in that zone.
Motion Detection
Top 4
Bottom 12
Left 3
Right 7
Sensitivity
5
Press SET to Return.
Ex. Zone
Top 2 Bottom 12 Left 0 Right 7
Ex. Full screen
28 29
COLOR CCD CAMERA COLOR CCD CAMERA
SS
EETTUUPP
MM
EENNUU
SS
EETTUUPP
MM
EENNUU