Filter
Top Products
Power Input Terminal
Power supply terminal (DC12V±10%).
Power LED
Illuminates when power is supplied.
Video Output Jack
Used to connect an external video monitor in jack.
Communication Control Connector
Used to connect the Remote Controller (Optional). Includes external 'SYNC' signal
input pin, which is used for the line lock function.
Includes the RS-485 communication pin.
External Control Connector
Relates to the motion detection output signal.
Zoom and focus functions can be controlled using external siganals.
Connection
Connect Video Out Jack to the monitor's Video In jack as shown below.
Connecting to Monitor
• Connection methods may vary depending on the video equipment. Please
refer to the model specific instruction manual.
• Connect cables with the unit powered down.
• Set the 75Ω/ Hi-Z selection switch as shown below if you have an intermediate
device.
CCD Camera
Intermediate End monitor
Connecting to Power
Each model has a different power input specification.
Please check the model type and standard power requirement before
connecting to power.
Overview
COLOR CCD CAMERA User’s Manual
15
COLOR CCD CAMERA User’s Manual
14
CCD Camera Monitor
DC Power Type (DC 12V, 500mA)
Use DC 12V/500mA power source for SDZ-300ND/PD.
AC/DC Power Type
Use AC24V/500mA or DC 12V/500mA power
source for SDZ-300N/P.
• Connect the power once the installation is complete.
• The wire is polarized. Match '+' and '-' terminals properly.
Notes
Power Input Terminal