Filter
Top Products
Eng-27Eng-27
2-4) SCREEN SAVE - KEY
Allows users to set SCREEN SAVE MODE of monitor. PICTURE screen is off when the SCREEN
SAVE KEY is pressed, Users can exit from SCREEN SAVE MODE by pressing SCREEN SAVE
BUTTON again under picture “OFF” status. SCREEN SAVE MODE is automatically cancelled and
picture is “ON” when an event such as an alarm or loss at SCREEN SAVE MODE occurs.
2-5) ALARM RESET- KEY
Alarm function can be cancelled while the alarm is working.
2-6) QUAD/PAGE- KEY
Allows users to display QUAD -A or QUAD - B at QUAD DISPLAY MODE.
•
QUAD - A: QUAD DISPLAY MODE from Camera 1 to Camera 4
•
QUAD - B: QUAD DISPLAY MODE from Camera 5 to Camera 8
2-7) LIVE/VCR- KEY
Allows users to switch LIVE MODE to VCR MODE or VCR MODE to LIVE MODE. If VCR MODE
is cancelled, the QUAD picture of LIVE MODE will be automatically displayed. In case any event
happens at VCR MODE such as ALARM, the MODE will be automatically switched to LIVE MODE,
and the pre-set operation for the event will be carried out. If there is no external input at VCR MODE,
the OSD “NO SIGNAL” will be displayed.
•
LIVE MODE: Image and voice signal from CAMERA is displayed.
•
VCR MODE: External image and voice signal from VCR terminal from the rear of the monitor is
displayed.