Filter
Top Products
Eng-30Eng-30
Chapter 3: Setting each item function at SETUP
MENU
Pressing the MENU BUTTON of the FRONT PANEL allows users to enter SETUP MENU and see the
following menu OSD box. Setting method of each SETUP MENU function and operation is as follows.
3-1) ADJUST MENU function and setting method
•
Function: Allows adjustment to the display status
•
Setting method: Move to #1. ADJUST MENU by using▲/▼ KEY and press the ENTER
SWITCH to display the OSD as shown in the figure below. (The figure shows the initial setting
status.)
Move to a target item by using ▲/▼ KEY.
Enter the item by pressing the ¥ENTER SWITCH.
At this time, set a target value by using ▲/▼KEY.
You can move to another item by using▲/▼ KEY after setting the target value.
(1) CONTRAST : Adjusts light and shade of screen
(2) BRIGHT : Adjusts lightness of entire screen
(3) COLOR : Adjusts color density
(4) TINT : Adjusts color sense
(5) SHARPNESS : Adjusts contour of screen
06/01/03 13:14:00
1. ADJUST
2. DATE/TIME
3. DWELL TIME
4. DISPLAY
5. TITLE
6. ALARM
7. NETWORK SETUP
8. VIEW EVENT LOG
06/01/03 13:14:00
CONTRAST 50
BRIGHT 50
COLOR 50
SHARPNESS 50
TINT 50
SETUP MENU
ADJUST SETTING
VE_1.07