Filter
Top Products
110
Symptom Explanation/Solution
When the screen
is exposed to
direct sunlight
during recording,
the screen turns
red or black for an
instant.
Do not leave the camcorder with the LCD screen exposed to direct
sunlight.
•
During recording,
the date/time does
not display.
“Date/Time Display” to on.
page 85
•
The beep sound is
not heard.
Set the "Beep Sound" to “On.”
The beep sound is temporally off while recording videos.
When the Audio/Video cable jack is connected to the camcorder, the
beep sound will automatically turn off.
•
•
•
There is a
time difference
between the point
where you press
Recording start/
stop button and
the point where
the recorded video
starts/stops.
On your camcorder, there may be a slight time delay between the
point when you press Recording start/stop button and the actual point
where the recorded video starts/stops. This is not an error.
•
The recording
stops.
The internal temperature of your camcorder is unusually high. Turn off
your camcorder and leave it for a while in a cool place.
Your camcorder is damp and moist inside (condensation). Turn off
your camcorder and leave it for about 1 hour in a cool place.
•
•
You cannot record
a photo image.
Set your camcorder to Record mode.
page 24
Release the lock on the write-protection tab of the memory card if set.
The storage media is full.
Use a new memory card or format the storage media.
page 81
Remove unnecessary images.
page 70
•
•
•
troubleshooting