Samsung SPD-3310 Security Camera User Manual


 
SPEED DOME CAMERA User’s Manual
30
SPEED DOME CAMERA User’s Manual
31
Installing Your Camera
Installing Your Camera
Protocol(SW2)
ID(SW1)
Safety
Cable
Alignment
Directions
Alignment
Direction
Guides
Alignment
Direction
Guides
3. Setting Up Camera DIP Switches
DIP switches for communication and ID protocols are located on the bottom of the
camera. For the switch settings, refer to the dip switch settings of this manual.
5. Connecting Camera Safety Cable and Attaching Camera
Carefully attach the camera to the mount following the alignment guide marks as shown
in the picture. First hook the camera's safety cable on the mount, and then attach the
camera.
To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.
•Makesuretofirsthookthecamera'ssafetycabletothemountbeforeproceeding.
Otherwise you may be exposed to serious injury caused by a fallen camera.
Notes
To attach the
camera
To detach the
camera
UNLOCK
Unlock Button
To attach or detach the camera, refer to the picture.
* Attaching the camera: Hold up the camera and push it to the mount as shown in the
picture. Push the camera until you hear a “click”.
* Detaching the camera: To detach the camera, pull the camera downward while pushing
the unlock buttons on the camera upward.