Filter
Top Products
SPEED DOME CAMERA User’s Manual
58
SPEED DOME CAMERA User’s Manual
59
Start Limit
Enter: Set ESC: Exit
End Limit
Enter: Set ESC: Exit
Pan/Tilt Limit
①Pan Limit
②Tilt Limit
Pan/Tilt Limit
①Position
②ON/OFF OFF
P/T Setting
①Pan/Tilt Limit
②Area Setting
③Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
⑦Auto Track1
⑧Auto Track2
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
➡
➡
Start Limit
Enter: Set ESC: Exit
End Limit
Enter: Set ESC: Exit
⇨
⇨
16. Pan/Tilt Limit
▶
Main Menu/P/T Setting/Pan/Tilt Limit
The moving ranges in the Pan/Tilt directions can be limited.
Position
:
Selecting the Position menu brings up the following screen
if it is for the Pan Limit setting. Move the joystick left and
right to select a movement range from the starting point to
the end.
On/Off
:
Cancels or activates the Pan/Tilt Limit functions.
The following picture shows the Tilt Limit setting.
Move the joystick left and right to select a movement
range from the starting point to the end.
Functional Description Functional Description
P/T Setting
End Position
Enter: Set ESC: Exit
⇨
Start Position
Enter: Set ESC: Exit
17. Area Setting
▶
Main Menu/P/T Setting/Area Setting
The Area Setting menu enables selecting certain locations in
the course of the Pan and Tilt operation, and then display the
areas with the OSD (On Screen Display) texts when the camera
passes through them. Up to 8 areas can be selected.
Area Name
:
You can add names to selected areas. Names can be up to
12 characters and can be entered via the joystick and the
Enter key. Once a name is entered, use the joystick and the
Enter key to perform the Set command and save the name.
Position
:
As shown in the picture below, move the joystick to select
the upper left corner and lower right corner of an area.
On/Off
:
Cancels or activates the display function of selected areas.
Area Setting
①Area 1
②Area 2
③Area 3
④Area 4
....
P/T Setting
①Pan/Tilt Limit
②Area Setting
③Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
⑦Auto Track1
⑧Auto Track2
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
➡
➡
Area 1
Area Name
Position
ON/OFF OFF
Area Name 001[ ]
0123456789()[]#&%/~-=_
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
äöÖüÄÜàâçéèêëîïôûôùÿñÑáí
óúÀÂÇÉÈÊËïïÔߌæÑÛÙŸÁÍÓÚÂ
ABC->中文1 BACK SPACE CLR SET