Samsung SPD-3310 Security Camera User Manual


 
SPEED DOME CAMERA User’s Manual
66
SPEED DOME CAMERA User’s Manual
67
P/T Setting
Pan/Tilt Limit
Area Setting
Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
Auto Track1
Auto Track2
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Auto Track 2
Zone Setting
Indicator OFF
Target Lock OFF
Zone 1
①Position
②Mode MASK
③ON/OFF OFF
Track Zone
①Zone 1
②Zone 2
③Zone 3
④Zone 4
⑤Zone 5
⑥Zone 6
⑦Zone 7
⑧Zone 8
This function is available only with the SPD-3700T.
Auto Track 2 provides Auto Track related settings other than
the ones programmed in the Auto Track 1 menu.
Zone Setting
:
- Position : Enables designating certain areas as zones for
the Auto Track operation. The setting procedures
are the same as for Area Mask.
- Mode : Two modes are available: Mask and Alarm. When
Mask is selected, the camera does not follow the
object entering the masked zone. This is useful if
the camera catches swaying objects such as tree
branches and flags during the Auto Track peration.
When Alarm is selected, the camera activates an
alarm if an object enters the zone.
- On/Off : Activates or deactivates the Zone function.
Indicator
:
Indicates objects with icons on the screen.
- Off : Disables the Indicator function.
- On : Indicates both the pointer and target.
- Pointer : Indicates the indicator when following an object
using the joystick; shows as a cross in the center
of the screen.
23. Auto Track 2 (SPD-3700T Only)
Main Menu/P/T Setting/Auto Track2
Functional Description Functional Description
- Target : Indicates the camera’s target for the Auto Track operation; when a moving object is
detected, a square grid appears and surrounds the object.
Target Lock
:
Target Lock is useful to select and follow an object using the Auto Track mode while operating
the camera with the joystick. Target Lock can be turned On or Off.
To activate the Auto Track mode, turn on Target Lock, select an object to follow, and then press
Enter.
•AutoTrackisspecificallytotrackdownintruders.Thus,itmaynotbesuitabletomonitora
crowd.
•Ifthecameraisnotsafelysecured,trackingerrorsmayoccur.
•Ifthecameralensissmearedwithforeignsubstancesorisscratched,anerrormay
occur causing the camera to not behave as expected.
•Thecameramaynotfollowanobjectortrackingerrorsmayoccurunderthefollowing
conditions:
If the contrast between an object and the background is low
If the camera lens is smeared with foreign substances, e.g. raindrops or snowflakes
If the lighting is changing dramatically
If many movements around an object are detected
If an object moves vertically on the optic angle of the camera
If an object passes directly under the camera
If an object creates inconsistent light levels, e.g. the object is too shiny or flickering
In environments where there are light reflections causing internal reflections of camera,
e.g. windows, shiny road surfaces, and backlights
If an object moves behind large and tall objects, e.g. telephone poles
If an object moves too quickly
If the camera is vibrating
Notes