Samsung SPD-3350 Security Camera User Manual


 
SPEED DOME CAMERA User’s Manual
56
SPEED DOME CAMERA User’s Manual
57
Tour SEQ
Setting
Execute
Clear
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
MD Dwell Time OFF
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Tour SEQ
NO Group DWT(s)
01: * 003
02: * 003
03: * 003
04: * 003
05: * 003
06: * 003
13. Tour SEQ
Main Menu/Sequence Setting/Tour SEQ
Selecting Tour SEQ recalls groups of preset locations in a
consecutive manner. Up to 6 groups can be listed for this
function.
Settings
:
Selecting the Settings menu brings up the following screen.
Using the joystick, you can enter desired group numbers to
the Group section. DWT indicates the camera’s standby
time before a new group is recalled.
Execute
:
Executes the group operation.
Clear
:
Deletes the selected group.
PTZ Trace
Trace 1
Trace 2
Trace 3
Trace 4
PTZ Trace 1
Replay
Memorize
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
MD Dwell Time OFF
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
14. PTZ Trace
Main Menu/Sequence Setting/PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan,
Tilt, Zoom and Focus) are memorized and replayed.
Replay
:
Replays a route saved by the Trace function. Use the Stop
button to stop the replay.
Memorize
:
Up to 120 seconds of a memory can be saved. The memory
duration varies depending on the difficulty level of the PTZ
Trace action. If the memory capacity is full, the Over
message appears and the memorization action is
terminated.
Functional Description Functional Description