Filter
Top Products
38_ using the DVR
using the DVR
• Manual Input of ID : Prompts you to enter the user ID
manually for the login process.
- Checked (
) : Encloses the registered user IDs with the
[
] symbols.
Use the virtual keyboard to enter the user ID.
4. When the permission setup is done, press <OK>.
System Management
You can check the system version, update to a newer version, as well as data backup and initialization.
Checking the System Information
You can check the current system version, broadcasting system, MAC address. You can update the system.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <System> window to
move to <System Management>, and press [ENTER]
button.
2. Check the Version, Broadcast Format, and MAC Address.
• System Information : Shows the current system’s
information.
The values can not be changed by a user.
• S/W Upgrade : Updates the DVR’s software.
Ex : If you connect to a storage device that has upgradable software
installed, and return to the <System Management> menu, the
current software version will be displayed.
Software Version V1.00h_100315180929
Broadcast Format
NTSC
MAC Address 00:00:F0:54:FF:FF
System Management
System Information
Settings
Previous
System Information
Upgrade
Device Network
Version No S/W Data
S/W Upgrade
Login
ID
*****
Password
OK Cancel
Software Version V1.00h_100315180929
Broadcast Format
NTSC
MAC Address 00:00:F0:54:FF:FF
System Management
System Information
Settings
Previous
System Information
Upgrade
Device v3.1.0.4
Version V1.03h_110314215048
S/W Upgrade