Samsung SVD-4700 Security Camera User Manual


  Open as PDF
of 25
 
COLOR DOME CAMERA User Guide
22
COLOR DOME CAMERA User Guide
23
Operating Your Camera
MAIN SETUP
SSDR OFF
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET
OFF
FOCUS
Motion Detection
This product has a feature that will detect movements of objects in 8 different areas on the
screen. The camera detects an object’s movement by sensing disparity of outline, brightness
levels and color. The camera sends a detection signal out via the MD output terminal and will
zoom into a pre-determined point.
1. Please press the Function Setup Switch.
OFF : MOTION DETECTION mode is cancelled.
ON : Any motion in the selected areas is observed.
•AREA SEL : You can select 8 different sensitivity MOTION
DET area.
•AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
•SEL POS(XPOS/YPOS) : You can control MD area size.
•SMARTZOOM:Smartzoomisoperatedinconnection
with MOTION DETECTION. When the
SMARTZOOMfunctionis‘ON’whilethe
MOTION DETECTION mode is ‘ON’, the
zoomgoestotheTARGETZOOM
position once motion is detected. Once
the zoom action is finished and ‘DWELL
TIME’ has passed, the zoom returns to
the‘STARTZOOM’position.
- START ZOOM : By moving the left or right direction of the Function Setup Switch in the
‘START ZOOM’ item to select the zoom position from 1x to 12x to be
returned after the ‘SMART ZOOM’ action is over.
- TARGET ZOOM : By moving the left or right direction of the Function Setup Switch in the
‘TARGET ZOOM’ item to select the zoom position from 1x to 12x to be
used during MOTION DETECTION.
- DWELL TIME : By moving the left or right direction of the Function Setup Switch in the
‘DWELL TIME’ item to select a time between 5 and 60 seconds for the dwell
time before the zoom is returned to the ‘START ZOOM’ position.
(5,7,10,15,20,30,40,60 sec)
TipsonUsingtheMotionDetectionFeature
•Thefeaturemaynotfunctionproperlyunderflickeringlightconditions.
•Thecamerainterpretssuddenchangesinlightingandsubsequentchangein
brightnessofanobjectasmotion.
•Withthefeatureenabled,otheralgorithmsmayrequireadditionaltimetooperate.
Notes
•Thissystemdoesnotguaranteepreventionoffireortheft.Themanufacturershallnot
beheldresponsibleforanyaccidentordamageincurred.
•ConnectanexternalalarmdevicetoMDOutonbackofthecamera.
Notes
MOTION DET SENSTIVITY
AREA1
MIN
AREA8
MAX
 previous next