Samsung SVD-4700 Security Camera User Manual


  Open as PDF
of 25
 
COLOR DOME CAMERA User Guide
12
COLOR DOME CAMERA User Guide
13
Connection
Connecting to Monitor
Intermediate
Endmonitor
MonitorCCTVCamera
CCTVCamera
Please connect the video output terminal located on the back of the camera to the monitor.
•Theconnectionmethodvariesdependingonthetypeofmonitorandaccessories.Please
refer to the user's manual for each instrument.
•Pleaseturnoffthepowerwhenconnecting.
•PleaseselectHi-Zonthe75Ω/Hi-ZswitchfortheintermediatevideoTVsetandselect
75ΩfortheIntermediatedeviceasshowninthepicturebelow.
Connecting to Power
The recommended adaptor specification for
SVD-4700 is DC 12V / 500mA / AC24V /
500mA.
Please check the standard power requirement
before connecting the power.
•Thereforehavinganexcessivelylongdistancebetweenthepoweradaptorandthe
camera may affect the camera’s performance.
Standardvoltageforcameraoperation:DC12V±10%,AC24V±10%
There may be some deviation in voltage drop depending on the type of wire and the
manufacturer.
ThesetforAmericadoesnotincludethepoweradapter.
Whentheresistancevalueofcopperwireisat[20°C(68°F)]
•Pleaseuseapoweradapterthatmeetstherequiredstandards.
•Pleaseconnectthepowerafterinstallation.
Notes
Copperwiresize(AWG)
#24(0.22㎟) #22(0.33㎟) #20(0.52㎟) #18(0.83㎟)
Resistancevalue(Ω/m)
0.078 0.050 0.030 0.018
Voltagedrop(V/m)
0.028 0.018 0.011 0.006
WHITE (TRX-)
RED (TRX+)
 previous next