Filter
Top Products
ENGLISH
2424
How to Use the Battery Pack
Charging the Battery Pack
1. Turn off the Miniket Photo by pressing the [POWER]
button.
◆ Charging will begin only when the Miniket Photo is turned off
(using AC Power Adapter or USB cable).
2. Insert the Battery Pack to the Miniket Photo.
3. Open the Connector Cover of the set.
4. Charge the Miniket Photo.
You can charge the Battery Pack using AC Power Adapter or USB cable.
[ Note ]
✤ You may use the Miniket Photo powered by the AC Power Adapter
indoors where available.
[ Warning ]
✤ It is recommended to fully charge the Battery Pack before use.
✤ You should only charge the battery in an environment between 32°F (0°C)
and 104°F (40°C).
✤ If ambient temperature is too low when charging, it may take long to fully
charge or may not fully charge the battery, which results the green
indicator will not turn on.
✤ Before connecting the cable, make sure that you don’t have any foreign
substances between connectors.
Connecting the AC Power Adapter
Connecting the USB Cable
4
4
DC Power Jack
USB Port
AC Power Adapter Connect the AC Power Adapter with the Miniket Photo properly
and plug the AC Power Adapter to the wall outlet.
USB Cable Connect the USB Cable with the Miniket Photo properly and
connect the other side to a USB port of a PC.