Filter
Top Products
ENGLISH
5050
Setting the Miniket Photo : Setting the System
To save battery power, you can set the Auto Shut Off function which turns off the Miniket Photo if there is no operation for a
certain period of time.
1. Turn the Mode Dial to the Settings mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Select <Auto Shut Off> by moving the joystick left / right.
4. Select the desired option by moving the joystick up / down and then press
the joystick (OK).
◆ <Off>: Cancel the Auto Shut Off function.
◆ <3min>: Automatically turns off after 3 minutes.
◆ <5min>: Automatically turns off after 5 minutes.
5. After you finish setting, turn the Mode Dial to the desired mode.
[ Notes ]
✤
The <Auto Shut Off> will not function when you connect the AC Power Adapter to the Miniket Photo.
The <Auto Shut Off> functions when the Battery Pack is the only power source.
✤
<Auto Shut Off> will only function when you set this function in Settings mode.
✤
Press the [POWER] button to revive the Miniket Photo.
✤
<Power Save LCD> will reduce the brightness of the LCD screen to save power.
✤
Press any key to revive the LCD screen when the <LCD Off> turned off the LCD screen.
Setting the Auto Shut Off
3
4
Settings
Auto Shut Off
Move Select
TYPE
SettingsSettings
Auto Shut OffAuto Shut Off
Off
3min
5min
MoveMove SelectSelect
TYPE
SettingsSettings
Auto Shut OffAuto Shut Off
Off
3min
5min
MoveMove SelectSelect
Settings
Auto Shut Off
Move Select
00934J VP-MS10 UK~053 6/17/06 6:22 PM Page 50