Samsung VP - MS12(BL) Digital Camera User Manual


 
ENGLISH
6868
4
5
6
MENU
ISO
100
ISO
200
100
200
400
ISOISO
ISO
ISO
AUTO
PhotoPhoto
Auto
MoveMove SelectSelect ExitExit
ISO
400
ISO
Photo
Move Select Exit
OK
23
23
ISO
Photo
Move Select Exit
MENU
ISO
AUTO
ISO
200
ISO
400
100
200
400
ISOISO
ISO
ISO
100
PhotoPhoto
Auto
MoveMove SelectSelect ExitExit
OK
23
23
ISO
2592
ISO
100
Photo
Move Select Exit
ISO
Photo
Move Select Exit
IN
23
23
23
Photo Mode : Setting the Capturing Options
Setting the ISO Speed (Sensitivity)
ISO Speed is the rating of a film's sensitivity to light. Though Miniket Photo doesn't use film, they
normally use the same rating system to describe the sensitivity of the Miniket's imaging sensor.
1. Turn the Mode Dial to Photo mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
Menu screen appears.
4. Move the joystick left / right to select <ISO>.
5. Select an option by moving the joystick up / down, and then press the joystick
(OK).
6. Press the [MENU] button to exit the menu.
An icon indicating the selected ISO Speed appears on the screen.
If <Auto> is selected, no icon will be displayed.
[ Notes ]
The higher the ISO Speed number, the higher sensitivity to light. It results in brighter imaging under
darker lighting.
High ISO Speed setting may result in picture noise.
Regarding ISO setting in Scene modes, refer to page 72.
If <Anti-Shake> is set, ISO setting will be limited.
While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
3
ISO
IN
2592
Photo
Move Select Exit
ISO
Photo
Move Select Exit
23
23
23
AUTO
100
200
400
Automatically sets the ISO according to the light brightness
The standard sensitivity rate, and therefore it is the usual shooting sensitivity rate.
When you use this in a dark place, you can increase the shutter speed, but it might
come out grainy.
When you use this in a very dark place, you can greatly increase the shutter speed,
but you may get a rough image due to severe graininess.
00934J VP-MS10 UK~089 6/17/06 6:26 PM Page 68