Filter
Top Products
ENGLISH
7373
4
5
6
Photo Mode : Setting the Capturing Options
Setting the Sharpness
You can set the sharpness of the image to be captured. Set the image sharpness before
taking a picture.
1. Turn the Mode Dial to Photo mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
◆ Menu screen appears.
4. Move the joystick left / right to select <Sharpness>.
5. Select an option by moving the joystick up / down, and then press the
joystick (OK).
6. Press the [MENU] button to exit the menu.
◆ An icon indicating the selected sharpness appears on the screen.
◆ No icon will be displayed when it is set to <Normal>.
[ Note ]
✤
While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
MENU
PhotoPhoto
SharpnessSharpness
Soft
Normal
Sharp
MoveMove SelectSelect ExitExit
OK
Photo
Sharpness
Move Select Exit
23
23
Photo
Sharpness
Move Select Exit
MENU
PhotoPhoto
SharpnessSharpness
Soft
Normal
Sharp
MoveMove SelectSelect ExitExit
OK
23
23
2592
Photo
Sharpness
Move Select Exit
Photo
Sharpness
Move Select Exit
IN
23
23
23
3
IN
2592
Photo
Sharpness
Move Select Exit
Photo
Sharpness
Move Select Exit
23
23
23
<Soft>
<Normal>
<Sharp>
The image’s edges display softly and you can select this when you want
to edit it on the computer.
The image’s edges display sharply, and you can select this when you
want to print.
As the image’s edges are sharpened and emphasised, some noise
might occur although it is seen clearly
.
00934J VP-MS10 UK~089 6/17/06 6:26 PM Page 73