Samsung VP-MM10S(BL) Camcorder User Manual


 
124124
ENGLISH
DEUTSCH
Miscellaneous Information :
Connecting To Other Devices
Recording unscrambled content from other
digital devices
You can connect other external digital devices to Memory Camcorder
to record unscrambled contents.
1. Connect the provided Audio/
Video cable to the [Multi jack]
of the Memory Camcorder.
2. Connect the Audio/Video cable
to the external output terminal
of your digital devices (DVD,
DVC, etc.) by matching the
cable to the colours of the
terminals.
3. Press the [POWER] button
to turn on the Memory
Camcorder.
The Movie Record screen
appears.
4. Press the [MENU] button.
Move the [Joystick] left / right to select <Line In/Out>.
5. Move the [Joystick] up / down to select <In> and then press
the [Joystick(OK)].
6. Play back the other digital devices.
7. Press the [Record/Stop] button to start recording.
8. To stop recording, press the [Record/Stop] button again.
[ Note ]
The quality of an input signal recorded through the Line input
terminal cannot be guaranteed unless it comes from digital devices
(DVD, DVC, etc.).
Sonstige Informationen:
Anschluss an andere Geräte
Aufnahme unverschlüsselter Inhalte von
anderen digitalen Geräten
Sie können zur Aufnahme unverschlüsselter Inhalte auch weitere
digitale Geräte an den Speicher Camcorder anschließen.
1. Verbinden Sie das
beiliegende Audio/Video-
Kabel an den [Multi jack]
(Mehrfachanschluss) des
Speicher Camcorders.
2. Schließen Sie das Audio/
Video-Kabel an den externen
Ausgang des digitalen
Gerätes (DVD, DVC etc.)
an und achten Sie dabei
auf die Farbkodierung der
Kabelenden.
3. Drücken Sie die Taste
[POWER], um den Speicher Camcorder einzuschalten.
Der Bildschirm Movie Record (Videoaufnahme) wird angezeigt.
4. Drücken Sie die Taste [MENU].
Bewegen Sie den [Joystick] nach links oder rechts, um das
Menü <Line In/Out> auszuwählen.
5. Bewegen Sie den [Joystick] nach oben oder unten und wählen
<In> aus und drücken dann [Joystick(OK)].
6. Wiedergabe von anderen digitalen Geräten.
7.
Drücken Sie die Taste [Record/Stop], um die Aufnahme zu starten.
8. Drücken Sie die Taste [Record/Stop] erneut, um die Aufnahme
zu beenden.
[ Hinweis ]
Die Aufnahmequalität von Eingangssignalen wird nicht
gewährleistet, wenn diese nicht von digitalen Geräten stammen
(DVD, DVC etc.).
DC IN
Line Output
책1.indb 124책1.indb 124 2006-04-21 오전 11:46:402006-04-21 오전 11:46:40