Filter
Top Products
2
3
4
5
ENGLISH
Setting the CAM : Setting the System
9898
Setting the Beep Sound
You can set the beep sound on/off. When on, a beep will sound every time a button is pressed.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
2. Move the [ ▲/▼] switch to select System Settings and press the [OK] button.
3. Move the [ ▲/▼ ] switch to select <System> and press the [OK] button.
4. Move the [ ▲/▼ ] switch to select <Beep Sound> and press the [OK] button.
5. Move the [ ▲/▼ ] switch to select the desired sound and
press the [OK] button.
◆ On: Turn the effect sound on.
◆ Off: Turn the effect sound off.
6. Press the [Back] button to finish setting.
Mode Selection
MP3
Voice Recorder
File Browser
System Settings
Back
System Settings
Date/Time
System
Display
Memory
Back
Settings: System
Beep Sound
Off
5 Minutes
Reset
On
Demo
Auto Shut off
File No.
Video Mode
Start-up
Settings: System
Beep Sound
Off
5 Minutes
Reset
Off
Demo
Auto Shut off
File No.
Video Mode
Start-up
Notes
✤
If you select <Back> in the menu, the previous menu appears.
✤
When the earphones or Audio/Video cable is connected to the CAM,
the beep sound function does not operate.