Filter
Top Products
Network Camera Settings
3 Network Connection Settings
1
Select the desired language (e.g. English)
in the language selection window, and
then click the [SET] button.
The main menu window will be displayed.
Available languages: English, French,
German, Spanish
(Closing the initial window)
To change the language or
stop tasks such as live
image monitoring, click the
network disconnect button.
“SANYO NETWORK CAMERA, THE UNIT IS
DISCONNECTED” will be displayed, and the
camera will be disconnected from the network.
To reconnect the camera to the network, click
the [Refresh] button in the title bar.
Note:
•
If you close the web browser without clicking
the network disconnect button, the message
“THE UNIT IS BUSY!” may be displayed the
next time you try to access the camera.
Always be sure to use the network
disconnect button to close communication
with the camera.
•
If a problem with the web browser occurs
which causes the web browser to close
abnormally without using the network
disconnect button, wait three minutes or
more, and then re-access the camera.
2
Click the [NETWORK] button in the main
menu.
Note: When making the network connection
settings, always make sure that you
change the network settings first. After
making these settings, you can then
change the wireless LAN or PPP
settings as required.
L5AB2/US (VCC-WB2000) GB 2002, 7, 4
English
– 17 –