Filter
Top Products
OPTION SETTING
ADDRESS setting
1
Use the cursor button (
j
or
l
) to move the cursor to
SET for OPTION, then press the SET button.
The OPTION screen will appear.
Note:
The PRESET ON setting cannot be used when OPTION
settings are in use.
2
Use the cursor button (
j
or
l
) to move the cursor to
ADDRESS, and then use the cursor button (
d
or
c
) to
select the address.
Available settings:
0 (d) – 127 (c)
☞
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
ALARM setting
A
Alarm input setting (ALARM IN)
Make the following settings for alarm detection.
Connect the external alarm switch to the alarm input terminal on
the back of the camera.
1
Use the cursor button (
j
or
l
) to move the cursor to
SET for OPTION, then press the SET button.
The OPTION screen will appear.
Note:
The PRESET ON setting cannot be used when OPTION
settings are in use.
2
Use the cursor button (
j
or
l
) to move the cursor to
SET for ALARM, then press the SET button.
The ALARM SETTING screen will appear.
3
Alarm input setting
Use the cursor button (
j
or
l
) to move the cursor to
ALM for ALARM IN, and then use the cursor button (
d
or
c
) to set the input (e.g. ALM).
12
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
OPTION
CONTROL 485 ‚
ADDRESS 0
ALARM SET ‚
12
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
OPTION
CONTROL 485 ‚
ADDRESS 0
ALARM SET ‚
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
English
57