Sanyo VPC-C1 Camcorder User Manual


 
English
116
e Toggle the SET button up to change the displayed date order as
follows:
Toggle the SET button down to change it in the reverse order.
e If DISP OFF is selected, the date the image was captured is not
shown during playback.
4Press the SET button.
6
Select EXIT, and press the SET
button.
e The date and time setting is
completed, and you are returned to
the Option Setting screen.
Note
e Under normal conditions, while the battery pack is being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost. (The backup will last for about 7
days.) It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow steps
1
and
2
).
To correct the date and time settings
e After steps
1
and
2
, select the line of the setting that you want to change,
press the SET button, and follow the steps in the respective paragraphs
above to change the setting.
year/month/day month/day/year day/month/year DISP OFF (no display)