Filter
Top Products
129 English
<If “HDMI-CEC” is selected>
ON: Sets the HDMI-CEC function to “ON”.
OFF: Sets the HDMI-CEC function to “OFF”.
3 Press [I] or [J] to select the desired parameter.
4 Press the SET button.
5 Press the MENU button.
h This completes the TV output setting.
HINT
About the HDMI-CEC function
iThis is a system control function by which, through an HDMI cable, a
control signal is output to electronic devices and the operation of multiple
devices is coordinated.
iThe HDMI-CEC function will operate correctly only when the camera is
connected to a SANYO TV that incorporates the HDMI-CEC function.
iWhen the HDMI-CEC function is used, your TV’s remote control unit can
be used to operate the camera playback; however, it does not work to turn
the camera ON. In addition, in the playback mode, the camera’s power
save function is disabled.
iFor information concerning connecting and operation, please see your
TV’s instruction manual.
(As of May 2008, SANYO TVs that incorporate the HDMI-CEC function
have not been released.)